waterbycounty
Federal water data

County water report

Pike County Water Report

Drinking-water compliance, watershed health, monitoring records, and river conditions for Pike County, Illinois.

Water grade

C

Water score

60.4

State rank

#32

of 102

Health violations

1

EPA SDWIS, 5-year lookback

Watershed impaired

12.2%

188 water bodies assessed

Monitoring sites

9

15,580 recent measurements

Live streamflow

No gauge

HADLEY CREEK NEAR BARRY, IL

Water at a glance

Key Water Indicators for Pike County

EPA SDWIS

Safety Grade

C

Score: 60.4 / 100

EPA SDWIS

Active Violations

1

5-year health-based lookback

EPA ATTAINS

Watershed Health

12% impaired

188 bodies assessed

USGS NWIS

Streamflow Snapshot

No gauge

HADLEY CREEK NEAR BARRY, IL

EPA WQP

Monitoring Sites

9

15,580 recent readings

Source: EPA SDWIS · Safe Drinking Water Information System

Drinking Water Compliance

Compliance grade

C

Based on EPA SDWIS compliance history.

Water score

Higher scores indicate cleaner recent compliance records.

60.4/100

Health violations

1

Health-based violations

Violations per 100K served

6.2

Population-normalized SDWIS rate

Editorial analysis

Understanding Pike County’s Water

Drinking Water Quality Overview

EPA SDWIS

Pike County's drinking water earned a C grade, scoring 60.4 out of 100. Over the past five years, EPA SDWIS records 1 health-based violation — a single incident worth monitoring.

Watershed Conditions

EPA ATTAINS

Under the Clean Water Act §303(d), EPA ATTAINS tracks whether waterways meet quality standards for drinking, recreation, and aquatic life (reporting cycle: 2022). A notable 12.2% of assessed waterways carry an impairment designation (23 of 188 water bodies) across Pike County's watersheds. The leading impairment causes are mercury and fecal coliform. Impairment does not mean tap water is unsafe — it measures ambient waterway conditions upstream of treatment, not finished drinking water.

Monitoring Network

EPA WQP

EPA's Water Quality Portal (WQP) aggregates monitoring data from federal, state, and tribal agencies. Pike County has limited coverage with 9 active monitoring sites with 15,580 recent measurements on record. Predominant monitoring categories include organics, pesticide and physical. More monitoring sites generally indicate greater scientific attention to local water conditions — and provide the baseline data that regulators use to set future impairment listings.

Editorial advisory

What the data suggests for Pike County

Water Verdict

Pike County, Illinois receives a fair water quality assessment with a grade of C and a score of 60.4 out of 100. The water supply meets baseline federal standards, but there may be periods of elevated contaminant levels or infrastructure concerns worth monitoring. Separately, EPA ATTAINS assessments cover 188 water bodies in the county's watershed, with 12.2% listed as impaired under the Clean Water Act — a source-water measure that is tracked independently of tap-water compliance.

Violation Context

EPA SDWIS records for Pike County, Illinois show 1 health-based violation, meaning a water system experienced at least one exceedance of federal contaminant limits or treatment requirements. At 6.2 violations per 100,000 people served, this rate is moderate and suggests recurring water quality challenges. This compliance record sits alongside an unusually deep monitoring archive: 15,580 water-quality results have been logged across the county in the EPA Water Quality Portal over the past five years.

Consumer Guidance

Tap water in Pike County meets baseline standards but the compliance record shows room for improvement, with a Grade C rating. Pike County's drinking-water compliance score is 60.4 out of 100. The violation rate for Pike County is 6.2 per 100,000 people served. Residents who are immunocompromised, pregnant, or have young children may benefit from using an NSF 53-certified filter. Contacting your local utility for the current Consumer Confidence Report will confirm which specific violations were recorded and whether they have been resolved. Mercury is the leading impairment cause in Pike County's watershed. There are 9 active water-quality monitoring sites in Pike County. A pipeline streamflow snapshot from the HADLEY CREEK gauge is also available on this page.

Regional Context

Pike County has better water quality than the average county in Illinois. Its water score is 12.6 points higher than the state average, indicating stronger water system performance relative to neighboring counties.

Advisory text summarizes county-level public records and is not a replacement for your utility's current Consumer Confidence Report or direct local notices.

Contaminants & Resources

Key issues flagged in Pike County's water environment

Watershed Impairment Causes (EPA ATTAINS)

  • 1

    Mercury

    Impairment cause per EPA Clean Water Act §303(d) assessment

  • 2

    Fecal coliform bacteria

    Impairment cause per EPA Clean Water Act §303(d) assessment

  • 3

    Phosphorus (excess nutrients)

    Impairment cause per EPA Clean Water Act §303(d) assessment

Source: EPA ATTAINS · Reporting cycle 2022

Official EPA Resources for Pike County

EPA How's My Waterway

Interactive watershed health data for Pike County

EPA ECHO: Drinking Water Systems

Search water utilities and violation records for Pike County

Consumer Confidence Reports (IL)

Annual water quality reports from utilities in Illinois

Clean Water Act §303(d)

Watershed Health

Impaired Water Bodies

12.2%

23 of 188 assessed

Some impairment

Top Impairment Causes

  • 1

    MERCURY

  • 2

    FECAL COLIFORM

  • 3

    PHOSPHORUS, TOTAL

Source: EPA ATTAINS · Reporting cycle 2022

Impairment is determined under the Clean Water Act §303(d): a water body is impaired when it fails to meet state-defined quality standards for designated uses (drinking, recreation, aquatic life). Assessment coverage varies by state; counties without assessed water bodies are not shown.

Past 5 years

Water Quality Monitoring

Monitoring Sites

9

Active in the past 5 years

Measurements Recorded

16K

15,580 total readings

Most Measured

  • Organics, Pesticide
  • Physical
  • Nutrient

Categories measured most frequently

Data from the EPA Water Quality Portal (WQP), aggregating monitoring records from federal, state, and tribal sources. Each measurement represents a single sample analyzed for a specific characteristic (e.g., E. coli, pH, dissolved oxygen, nitrogen).

Free tool

Estimate Your Water Costs

Water Cost Estimate

3

3 people  ·  ~225 gal/day

Annual Total

$558

Monthly

$47

Water Bill

$558/yr

Filter Cost

$0/yr

Safety Grade for Pike County:C — Moderate

Some violations or watershed impairment detected.

Estimates use the national average residential water rate ($0.0068/gal, EPA/AWWA 2023) and EPA WaterSense per-person consumption baseline (75 gal/person/day). Actual bills vary by utility, usage tier, and local infrastructure fees. For informational purposes only.

Try the full calculator →

Improve your water quality at home

Berkey filters remove 99.9%+ of contaminants from tap water.

Shop Berkey →

Sponsored

Test your tap water

Tap Score provides professional mail-in water testing.

Get Tested →

Frequently Asked Questions

What is the water quality in Pike County, Illinois?
Pike County, Illinois has a drinking-water quality grade of C with a score of 60.4/100, based on EPA SDWIS compliance data. The county has 1 health-based drinking water violation over the past 5 years. Watershed health, monitoring records, and streamflow snapshots are reported separately on this page.
Are there any water violations in Pike County?
Pike County has 1 health-based drinking water violation recorded by the EPA over the past 5 years. Health-based violations indicate instances where contaminant levels exceeded EPA Maximum Contaminant Levels (MCLs). Violations may have been resolved — check with your local water utility for current status.
How healthy are the watersheds in Pike County?
EPA ATTAINS assessments under Clean Water Act §303(d) indicate 12.2% of Pike County's 188 assessed water bodies are classified as impaired (23 impaired). The top reported causes are MERCURY, FECAL COLIFORM, PHOSPHORUS, TOTAL. Impairment means the water body fails to meet state quality standards for at least one designated use — drinking water source, recreation, aquatic life, or fish consumption. Note: watershed impairment doesn't always translate to tap-water issues; treatment plants can remove most regulated contaminants.
How much water-quality monitoring happens in Pike County?
EPA's Water Quality Portal records 15,580 measurements from 9 monitoring sites in Pike County over the past five years. The most frequently measured characteristic groups are Organics, Pesticide, Physical, Nutrient. Each measurement is a single sample analyzed for one characteristic (E. coli, pH, dissolved oxygen, etc.). High monitoring density means more scientific evidence behind any reported signal — it does not by itself indicate water quality.
How does Pike County water compare to the Illinois average?
Pike County's SDWIS water quality score of 60.4/100 is higher than the Illinois state average of 47.8. The average water quality grade across Illinois is D, based on data from 102 counties with available SDWIS data.
Is tap water safe to drink in Pike County?
Based on EPA SDWIS data, Pike County has a water quality grade of C (60.4/100). This indicates moderate compliance. Some violations have been recorded but overall standards are maintained. The grade speaks to the public water system, not the watershed — for watershed-level concerns, see the Watershed Health zone. For the most up-to-date information, contact your local water utility or review your Consumer Confidence Report (CCR).
Does Pike County have clean drinking water?
Pike County has 1 health-based drinking water violation according to EPA records. With a water quality score of 60.4/100 and grade C, the county's drinking water has had some compliance issues but continues to be monitored. Note: drinking-water compliance speaks to the public water system, not necessarily to the watershed itself — check the Watershed Health zone for ATTAINS §303(d) data.
How does Pike County rank for water quality in Illinois?
Pike County ranks #32 out of 102 counties in Illinois by SDWIS water quality score (1 = best). With a score of 60.4/100, it falls in the top third of counties statewide. The ranking reflects EPA SDWIS compliance only — not watershed impairment, monitoring density, or streamflow, which are tracked separately on this page.

Counties with Similar Water Quality

Ogle County

Illinois

C

60.8

Water score

St. Clair County

Illinois

C

61.0

Water score

White County

Illinois

C

59.0

Water score

Data Sources

Drinking-water compliance data from the EPA Safe Drinking Water Information System (SDWIS) via the ECHO enforcement database. Scores reflect compliance history and health-based violation counts.

Watershed health and impaired-waterway data from the EPA ATTAINS Clean Water Act §303(d) assessments, state-reported and EPA-finalized.

Water-quality monitoring counts from the EPA Water Quality Portal (WQP), federated USGS, EPA, and state agency sampling records over a rolling 5-year window.

Disclaimer: This data is informational only. It is not health, legal, or professional advice. For concerns about your specific water supply, contact your local water utility.

By Evan Brooks, Data EditorUpdated Reviewed by Evan Brooks, Data Editor

Explore more data for Pike County

Property TaxCost of LivingCrime RateIncomeHealthSchoolsDisaster RiskWeatherCounty Score