waterbycounty
Federal water data

County water report

Gallatin County Water Report

Drinking-water compliance, watershed health, monitoring records, and river conditions for Gallatin County, Kentucky.

Water grade

A

Water score

86.0

State rank

#20

of 118

Health violations

0

EPA SDWIS, 5-year lookback

Watershed impaired

0.0%

1 water bodies assessed

Monitoring sites

8

5,373 recent measurements

Live streamflow

71%

OHIO RIVER AT MARKLAND DAM NEAR WARSAW, KY

Water at a glance

Key Water Indicators for Gallatin County

EPA SDWIS

Safety Grade

A

Score: 86.0 / 100

EPA SDWIS

Active Violations

0

5-year health-based lookback

EPA ATTAINS

Watershed Health

0% impaired

1 bodies assessed

USGS NWIS

Streamflow Snapshot

71% of mean

OHIO RIVER AT MARKLAND DAM NEAR WARSAW, KY

EPA WQP

Monitoring Sites

8

5,373 recent readings

Source: EPA SDWIS · Safe Drinking Water Information System

Drinking Water Compliance

Compliance grade

A

Based on EPA SDWIS compliance history.

Water score

Higher scores indicate cleaner recent compliance records.

86.0/100

Health violations

0

Health-based violations

Violations per 100K served

0.0

Population-normalized SDWIS rate

Editorial analysis

Understanding Gallatin County’s Water

Drinking Water Quality Overview

EPA SDWIS

Gallatin County earns an A grade for drinking water quality, scoring 86.0 out of 100. EPA's Safe Drinking Water Information System (SDWIS) records zero health-based violations over the past five years — a strong compliance signal for a small county.

Watershed Conditions

EPA ATTAINS

Under the Clean Water Act §303(d), EPA ATTAINS tracks whether waterways meet quality standards for drinking, recreation, and aquatic life (reporting cycle: 2022). None of the assessed waterways are listed as impaired (0 of 1 water bodies) across Gallatin County's watersheds. Impairment does not mean tap water is unsafe — it measures ambient waterway conditions upstream of treatment, not finished drinking water.

River & Streamflow Status

USGS NWIS

USGS NWIS gauge data (as of 2026-05-14T12:00:00.000-04:00) puts OHIO RIVER at 82.7k cfs — running somewhat below its historical average at 71% of mean. Streamflow is a leading indicator of drought stress, sediment load, and dilution capacity: low flows concentrate pollutants and warm water temperatures, stressing aquatic life and, in surface-water-dependent systems, the source water quality for treatment plants.

Monitoring Network

EPA WQP

EPA's Water Quality Portal (WQP) aggregates monitoring data from federal, state, and tribal agencies. Gallatin County has limited coverage with 8 active monitoring sites with 5,373 recent measurements on record. Predominant monitoring categories include inorganics, minor, metals and physical. More monitoring sites generally indicate greater scientific attention to local water conditions — and provide the baseline data that regulators use to set future impairment listings.

Editorial advisory

What the data suggests for Gallatin County

Water Verdict

Gallatin County, Kentucky receives an excellent water quality assessment with a grade of A and a score of 86.0 out of 100. The water supply meets or exceeds federal safety standards, and residents can generally drink tap water with confidence. Separately, EPA ATTAINS assessments track 1 water body in the county's watershed, none of which are currently listed as impaired under the Clean Water Act. At the most recent USGS reading, local streamflow was below its historical mean at 71.4% — worth watching in drier seasons.

Violation Context

EPA SDWIS records for Gallatin County, Kentucky show zero health-based violations, indicating that the county's water systems met all federal safety standards during the reporting period. The violation rate is zero per 100,000 people served, which is the best possible outcome. For independent context, 5,373 water-quality monitoring results have been recorded across the county in the EPA Water Quality Portal over the past five years.

Consumer Guidance

The EPA compliance record for Gallatin County shows no recent health-based violations. No health-based violations have been recorded, placing Gallatin County in the top tier for drinking-water safety. Gallatin County's drinking-water compliance score is 86.0 out of 100. As a routine precaution, requesting your utility's annual Consumer Confidence Report each July gives you a full list of detected contaminants and their treatment levels. There are 8 active water-quality monitoring sites in Gallatin County. A pipeline streamflow snapshot from the OHIO RIVER gauge is also available on this page.

Regional Context

Gallatin County has better water quality than the average county in Kentucky. Its water score is 21.8 points higher than the state average, indicating stronger water system performance relative to neighboring counties.

Advisory text summarizes county-level public records and is not a replacement for your utility's current Consumer Confidence Report or direct local notices.

Clean Water Act §303(d)

Watershed Health

Impaired Water Bodies

0.0%

0 of 1 assessed

Mostly healthy

Top Impairment Causes

No specific impairment causes reported for the assessed water bodies in this county.

Source: EPA ATTAINS · Reporting cycle 2022

Impairment is determined under the Clean Water Act §303(d): a water body is impaired when it fails to meet state-defined quality standards for designated uses (drinking, recreation, aquatic life). Assessment coverage varies by state; counties without assessed water bodies are not shown.

Past 5 years

Water Quality Monitoring

Monitoring Sites

8

Active in the past 5 years

Measurements Recorded

5.4K

5,373 total readings

Most Measured

  • Inorganics, Minor, Metals
  • Physical
  • Nutrient

Categories measured most frequently

Data from the EPA Water Quality Portal (WQP), aggregating monitoring records from federal, state, and tribal sources. Each measurement represents a single sample analyzed for a specific characteristic (e.g., E. coli, pH, dissolved oxygen, nitrogen).

Live USGS Streamgage

River & Stream Conditions

Current Discharge

82.7Kcfs

May 14, 4:00 PM UTC

vs Long-Term Average

71%

Below typical

Primary Streamgage

OHIO RIVER AT MARKLAND DAM NEAR WARSAW, KY

USGS site
03277200
Drainage area
83,170 sq mi
Long-term mean
115.8K cfs

One representative streamgage (the one with the largest drainage area in the county). Many counties have multiple gauges; this view summarizes the primary one. The long-term mean is the full-record annual average; the percent-of-typical value compares the latest reading against that average.

Free tool

Estimate Your Water Costs

Water Cost Estimate

3

3 people  ·  ~225 gal/day

Annual Total

$558

Monthly

$47

Water Bill

$558/yr

Filter Cost

$0/yr

Safety Grade for Gallatin County:B — Good

Minor violations; waterways mostly healthy.

Estimates use the national average residential water rate ($0.0068/gal, EPA/AWWA 2023) and EPA WaterSense per-person consumption baseline (75 gal/person/day). Actual bills vary by utility, usage tier, and local infrastructure fees. For informational purposes only.

Try the full calculator →

Gallatin County has good water quality

Learn about water restrictions and conservation in your area.

Water Restrictions →

Frequently Asked Questions

What is the water quality in Gallatin County, Kentucky?
Gallatin County, Kentucky has a drinking-water quality grade of A with a score of 86.0/100, based on EPA SDWIS compliance data. The county has 0 health-based drinking water violations over the past 5 years. Watershed health, monitoring records, and streamflow snapshots are reported separately on this page.
Are there any water violations in Gallatin County?
Gallatin County has 0 health-based drinking water violations recorded by the EPA over the past 5 years. Health-based violations indicate instances where contaminant levels exceeded EPA Maximum Contaminant Levels (MCLs). Zero violations is an excellent record indicating consistent compliance with federal drinking water standards.
How healthy are the watersheds in Gallatin County?
EPA ATTAINS assessments under Clean Water Act §303(d) indicate 0.0% of Gallatin County's 1 assessed water bodies are classified as impaired (0 impaired). Impairment means the water body fails to meet state quality standards for at least one designated use — drinking water source, recreation, aquatic life, or fish consumption. Note: watershed impairment doesn't always translate to tap-water issues; treatment plants can remove most regulated contaminants.
How much water-quality monitoring happens in Gallatin County?
EPA's Water Quality Portal records 5,373 measurements from 8 monitoring sites in Gallatin County over the past five years. The most frequently measured characteristic groups are Inorganics, Minor, Metals, Physical, Nutrient. Each measurement is a single sample analyzed for one characteristic (E. coli, pH, dissolved oxygen, etc.). High monitoring density means more scientific evidence behind any reported signal — it does not by itself indicate water quality.
What's happening with rivers in Gallatin County right now?
Gallatin County's primary USGS streamgage on the OHIO RIVER has a pipeline snapshot of 82,700 cubic feet per second — 71% of the long-term mean of 115,779.63 cfs. Flow is within typical range for this gauge. For the latest gauge feed, visit waterdata.usgs.gov.
How does Gallatin County water compare to the Kentucky average?
Gallatin County's SDWIS water quality score of 86.0/100 is higher than the Kentucky state average of 64.2. The average water quality grade across Kentucky is C, based on data from 118 counties with available SDWIS data.
Is tap water safe to drink in Gallatin County?
Based on EPA SDWIS data, Gallatin County has a water quality grade of A (86.0/100). This indicates good to excellent water quality with strong SDWIS compliance. The grade speaks to the public water system, not the watershed — for watershed-level concerns, see the Watershed Health zone. For the most up-to-date information, contact your local water utility or review your Consumer Confidence Report (CCR).
Does Gallatin County have clean drinking water?
Gallatin County has 0 health-based drinking water violations according to EPA records. With a water quality score of 86.0/100 and grade A, the county's drinking water meets EPA standards with no recorded health violations. Note: drinking-water compliance speaks to the public water system, not necessarily to the watershed itself — check the Watershed Health zone for ATTAINS §303(d) data.
How does Gallatin County rank for water quality in Kentucky?
Gallatin County ranks #20 out of 118 counties in Kentucky by SDWIS water quality score (1 = best). With a score of 86.0/100, it falls in the top third of counties statewide. The ranking reflects EPA SDWIS compliance only — not watershed impairment, monitoring density, or streamflow, which are tracked separately on this page.

Counties with Similar Water Quality

Allen County

Kentucky

A

86.0

Water score

Ballard County

Kentucky

A

86.0

Water score

Barren County

Kentucky

A

86.0

Water score

Data Sources

Drinking-water compliance data from the EPA Safe Drinking Water Information System (SDWIS) via the ECHO enforcement database. Scores reflect compliance history and health-based violation counts.

Watershed health and impaired-waterway data from the EPA ATTAINS Clean Water Act §303(d) assessments, state-reported and EPA-finalized.

Water-quality monitoring counts from the EPA Water Quality Portal (WQP), federated USGS, EPA, and state agency sampling records over a rolling 5-year window.

Live streamflow from the USGS National Water Information System (NWIS), continuous discharge measurements from the largest-drainage gauge in each county, compared against the full-record long-term annual mean.

Disclaimer: This data is informational only. It is not health, legal, or professional advice. For concerns about your specific water supply, contact your local water utility.

By Evan Brooks, Data EditorUpdated Reviewed by Evan Brooks, Data Editor

Explore more data for Gallatin County

Property TaxCost of LivingCrime RateIncomeHealthSchoolsDisaster RiskWeatherCounty Score