waterbycounty
Federal water data

County water report

Whitman County Water Report

Drinking-water compliance, watershed health, monitoring records, and river conditions for Whitman County, Washington.

Water grade

A

Water score

86.0

State rank

#10

of 39

Health violations

0

EPA SDWIS, 5-year lookback

Watershed impaired

Not reported

EPA ATTAINS coverage varies by state

Monitoring sites

6

29,514 recent measurements

Live streamflow

57%

PALOUSE RIVER AT HOOPER, WA

Water at a glance

Key Water Indicators for Whitman County

EPA SDWIS

Safety Grade

A

Score: 86.0 / 100

EPA SDWIS

Active Violations

0

5-year health-based lookback

EPA ATTAINS

Watershed Health

Not reported

Coverage varies by state

USGS NWIS

Streamflow Snapshot

57% of mean

PALOUSE RIVER AT HOOPER, WA

EPA WQP

Monitoring Sites

6

29,514 recent readings

Source: EPA SDWIS · Safe Drinking Water Information System

Drinking Water Compliance

Compliance grade

A

Based on EPA SDWIS compliance history.

Water score

Higher scores indicate cleaner recent compliance records.

86.0/100

Health violations

0

Health-based violations

Violations per 100K served

0.0

Population-normalized SDWIS rate

Editorial analysis

Understanding Whitman County’s Water

Drinking Water Quality Overview

EPA SDWIS

Whitman County earns an A grade for drinking water quality, scoring 86.0 out of 100. EPA's Safe Drinking Water Information System (SDWIS) records zero health-based violations over the past five years — a strong compliance signal for a small county.

River & Streamflow Status

USGS NWIS

USGS NWIS gauge data (as of 2026-05-14T11:30:00.000-07:00) puts PALOUSE RIVER at 336.0 cfs — well below its long-term average at 57% of mean — low-flow conditions worth noting for water-dependent ecosystems. Streamflow is a leading indicator of drought stress, sediment load, and dilution capacity: low flows concentrate pollutants and warm water temperatures, stressing aquatic life and, in surface-water-dependent systems, the source water quality for treatment plants.

Monitoring Network

EPA WQP

EPA's Water Quality Portal (WQP) aggregates monitoring data from federal, state, and tribal agencies. Whitman County has limited coverage with 6 active monitoring sites with 29,514 recent measurements on record. Predominant monitoring categories include organics, pesticide and not assigned. More monitoring sites generally indicate greater scientific attention to local water conditions — and provide the baseline data that regulators use to set future impairment listings.

Editorial advisory

What the data suggests for Whitman County

Water Verdict

Whitman County receives an excellent water quality assessment with a grade of A and a score of 86.0 out of 100. The water supply meets or exceeds federal safety standards, and residents can generally drink tap water with confidence.

Violation Context

Whitman County has recorded zero health-based violations, indicating no recent health-based violations in the reporting period. The violation rate is zero per 100,000 people served, which is the best possible outcome.

Consumer Guidance

The EPA compliance record for Whitman County shows no recent health-based violations. No health-based violations have been recorded, placing Whitman County in the top tier for drinking-water safety. Whitman County's drinking-water compliance score is 86.0 out of 100. As a routine precaution, requesting your utility's annual Consumer Confidence Report each July gives you a full list of detected contaminants and their treatment levels. There are 6 active water-quality monitoring sites in Whitman County. A pipeline streamflow snapshot from the PALOUSE RIVER gauge is also available on this page.

Regional Context

Whitman County has better water quality than the average county in Washington. Its water score is 26.7 points higher than the state average, indicating stronger water system performance relative to neighboring counties.

Advisory text summarizes county-level public records and is not a replacement for your utility's current Consumer Confidence Report or direct local notices.

Past 5 years

Water Quality Monitoring

Monitoring Sites

6

Active in the past 5 years

Measurements Recorded

30K

29,514 total readings

Most Measured

  • Organics, Pesticide
  • Not Assigned
  • Organics, Other

Categories measured most frequently

Data from the EPA Water Quality Portal (WQP), aggregating monitoring records from federal, state, and tribal sources. Each measurement represents a single sample analyzed for a specific characteristic (e.g., E. coli, pH, dissolved oxygen, nitrogen).

Live USGS Streamgage

River & Stream Conditions

Current Discharge

336cfs

May 14, 6:30 PM UTC

vs Long-Term Average

57%

Well below typical

Primary Streamgage

PALOUSE RIVER AT HOOPER, WA

USGS site
13351000
Drainage area
2,500 sq mi
Long-term mean
590 cfs

One representative streamgage (the one with the largest drainage area in the county). Many counties have multiple gauges; this view summarizes the primary one. The long-term mean is the full-record annual average; the percent-of-typical value compares the latest reading against that average.

Free tool

Estimate Your Water Costs

Water Cost Estimate

3

3 people  ·  ~225 gal/day

Annual Total

$558

Monthly

$47

Water Bill

$558/yr

Filter Cost

$0/yr

Safety Grade for Whitman County:B — Good

Minor violations; waterways mostly healthy.

Estimates use the national average residential water rate ($0.0068/gal, EPA/AWWA 2023) and EPA WaterSense per-person consumption baseline (75 gal/person/day). Actual bills vary by utility, usage tier, and local infrastructure fees. For informational purposes only.

Try the full calculator →

Whitman County has good water quality

Learn about water restrictions and conservation in your area.

Water Restrictions →

Frequently Asked Questions

What is the water quality in Whitman County, Washington?
Whitman County, Washington has a drinking-water quality grade of A with a score of 86.0/100, based on EPA SDWIS compliance data. The county has 0 health-based drinking water violations over the past 5 years. Watershed health, monitoring records, and streamflow snapshots are reported separately on this page.
Are there any water violations in Whitman County?
Whitman County has 0 health-based drinking water violations recorded by the EPA over the past 5 years. Health-based violations indicate instances where contaminant levels exceeded EPA Maximum Contaminant Levels (MCLs). Zero violations is an excellent record indicating consistent compliance with federal drinking water standards.
How much water-quality monitoring happens in Whitman County?
EPA's Water Quality Portal records 29,514 measurements from 6 monitoring sites in Whitman County over the past five years. The most frequently measured characteristic groups are Organics, Pesticide, Not Assigned, Organics, Other. Each measurement is a single sample analyzed for one characteristic (E. coli, pH, dissolved oxygen, etc.). High monitoring density means more scientific evidence behind any reported signal — it does not by itself indicate water quality.
What's happening with rivers in Whitman County right now?
Whitman County's primary USGS streamgage on the PALOUSE RIVER has a pipeline snapshot of 336 cubic feet per second — 57% of the long-term mean of 589.8 cfs. This is well below typical — often a signal of drought stress on source water. For the latest gauge feed, visit waterdata.usgs.gov.
How does Whitman County water compare to the Washington average?
Whitman County's SDWIS water quality score of 86.0/100 is higher than the Washington state average of 59.3. The average water quality grade across Washington is D, based on data from 39 counties with available SDWIS data.
Is tap water safe to drink in Whitman County?
Based on EPA SDWIS data, Whitman County has a water quality grade of A (86.0/100). This indicates good to excellent water quality with strong SDWIS compliance. The grade speaks to the public water system, not the watershed — for watershed-level concerns, see the Watershed Health zone. For the most up-to-date information, contact your local water utility or review your Consumer Confidence Report (CCR).
Does Whitman County have clean drinking water?
Whitman County has 0 health-based drinking water violations according to EPA records. With a water quality score of 86.0/100 and grade A, the county's drinking water meets EPA standards with no recorded health violations. Note: drinking-water compliance speaks to the public water system, not necessarily to the watershed itself — check the Watershed Health zone for ATTAINS §303(d) data.
How does Whitman County rank for water quality in Washington?
Whitman County ranks #10 out of 39 counties in Washington by SDWIS water quality score (1 = best). With a score of 86.0/100, it falls in the top third of counties statewide. The ranking reflects EPA SDWIS compliance only — not watershed impairment, monitoring density, or streamflow, which are tracked separately on this page.

Counties with Similar Water Quality

Asotin County

Washington

A

86.0

Water score

Columbia County

Washington

A

86.0

Water score

Douglas County

Washington

A

86.0

Water score

Data Sources

Drinking-water compliance data from the EPA Safe Drinking Water Information System (SDWIS) via the ECHO enforcement database. Scores reflect compliance history and health-based violation counts.

Water-quality monitoring counts from the EPA Water Quality Portal (WQP), federated USGS, EPA, and state agency sampling records over a rolling 5-year window.

Live streamflow from the USGS National Water Information System (NWIS), continuous discharge measurements from the largest-drainage gauge in each county, compared against the full-record long-term annual mean.

Disclaimer: This data is informational only. It is not health, legal, or professional advice. For concerns about your specific water supply, contact your local water utility.

By Evan Brooks, Data EditorUpdated Reviewed by Evan Brooks, Data Editor

Explore more data for Whitman County

Property TaxCost of LivingCrime RateIncomeHealthSchoolsDisaster RiskWeatherCounty Score